FXR Express

Ships in 5 Days or Less

Ultimate in Performance

Featuring Active Posture Design™ to work with your SCBA to get you in the ready position with less stress and fatigue. Fight the fire, don't fight your gear!

 

More about this product

Product Features

FXR gear is the only gear in the industry utilizing Active Posture Design™ (APD).  APD focuses on achieving firefighter comfort and mobility through design rather than by oversizing the garment thereby reducing material and bulkiness.

FXR Express uses our top of the line, high-mobility pattern, offered in our 3 most popular high-end fabrics, equipped with all of our most popular options and features.

FXR-Logo

FXR Express Coats:

  • 30" Length
  • Inner zipper, outer Hook & Loop closure
  • 3M™ Scotchlite Reflective Material in Lime/Silver, NYC Configuration
  • DexFlex Elbows
  • Black PCA reinforced cuffs
  • XP11 Radio Pocket (9x3x2)
  • XM12 Fabric Strap (1x5)
  • Two XP34 Semi-Bellow Handwarmer Pockets (9x9x2)
  • XM01 - Long Nomex knit wrists with thumb loop

FXR Express Pants:

  • Mid-Rise with no rear panel
  • Inner zipper, outer hook & loop closure
  • 3M Scotchlite Reflective Material in 3" Lime/Silver
  • STS 1-layer foam knees, reinforced with black PCA
  • DexFlex Knees
  • Two XP30 Full Bellow Pockets (10x10x2)
  • DexCuff™ Reversed Tapered Cuffs, reinforced with black PCA

Material Combinations

FXR Express is available in 3 different materials combinations with options for upgraded liner systems.

  • Advance with Xtra-Lite & Stedair® 3000
  • Armor™ with Glide™ Pure & Stedair® 3000
  • Gemini XT with Caldura® SL2i & Crosstech® Black

Scroll down for more information & upgraded liner packages.

Advance™ with Xtra-Lite & Stedair® 3000

Advance™ - NOMEX®/ KEVLAR® Ripstop

Proven Performance, Great Value. Content - 60% KEVLAR®, 40% NOMEX®. Material Weight - 7.0 oz/yd2. Rip-stop weave.
  • Gold
  • Khaki
  • Black

Standard Liners (A/T)

Xtra-Lite™ thermal liner is made of a 100% NOMEX® facecloth with an aramid, needle-punch batting. Stedair® 3000 is a bi-component ePTFE membrane with a NOMEX® non-woven spunlace substrate.
  • XTRA-LITE™ (A)
  • Stedair® 3000 (T)

Upgraded Liners (C/F)

Caldura® NPi thermal liner has a twill weave facecloth made with KEVLAR® filament yarn. Stedair® 4000 is a bi-component ePTFE membrane with a NOMEX® non-woven pajama-check substrate.
  • Caldura® NPi (C)
  • Stedair® 4000 (F)

Armor™ with Glide™ Pure & Stedair® 3000

ARMOR™ - NOMEX®/ KEVLAR® Twill Weave

Lightweight, flexible and strong. Content - 50% KEVLAR® filament yarn with 50% NOMEX®/20% KEVLAR® blend spun yarn. Material Weight - 7.0oz/yd2. Twill weave.
  • Gold

Standard Liners (G/T)

Glide™ Pure has a twill weave facecloth made of 60% KEVLAR® filament yarn and 40% NOMEX®/LENZING FR® blend spun yarn, attached to a NOMEX® / KEVLAR® needle-punch batting. Stedair® 3000 is a bi-component ePTFE membrane with a NOMEX® non-woven spunlace substrate.
  • GLIDE™ PURE (G)
  • Stedair® 3000 (T)

Upgraded Liners (E/F)

Glide™ 2-Layer has a twill weave facecloth made of 60% KEVLAR® filament yarn and 40% NOMEX®/LENZING FR® blend spun yarn, quilted to 2 layers of NOMEX® nonwoven spunlace batting. Stedair® 4000 is a bi-component ePTFE membrane with a NOMEX® non-woven pajama-check substrate.
  • Glide™ 2-Layer (E)
  • Stedair® 4000 (F)

Gemini™ XT with Caldura® SL2i & Crosstech® Black

GEMINI™ XT - PBI®/KEVLAR®

Great strength, thermal stability, and superior abrasion resistance. Content - 60% KEVLAR®/40% PBI® Material Weight - 7.5oz/yd2. Plain weave reinforced with high strength filament.
  • Gold
  • Black

Standard Liners (S/X)

Caldura® SL2i has a twill weave facecloth with KEVLAR® filament yarn and Lenzing FR/KEVLAR®/Nylon blend spun yarn, quilted to a batting of 2 layers of NOMEX® non-woven spunlace. Crosstech® Black is an enhanced bi-component ePTFE membrane with a woven NOMEX® substrate from spun fibers (pajama check) .
  • Caldura® SL2I (S)
  • Crosstech® Black (X)

Upgraded Liners (P/K)

Glide™ with PBI® G2 has a twill weave facecloth with 60% KEVLAR® filament yarn and 40% NOMEX®/LENZING FR® blend spun yarn, quilted to 2 layers of PBI®/Aramid spunlace batting. Stedair® Gold is a bi-component ePTFE membrane with a PBI®/NOMEX® non-woven spunlace substrate.
  • Glide™ with PBI® G2 (P)
  • Stedair® Gold (K)

Fire-Dex Construction

Fire-Dex Express Gear is made with the same quality construction that makes all Fire-Dex Turnouts superior.

From pattern design to manufacturing and sewing methods, from seam construction to testing and inspections, Fire-Dex goes the extra mile to ensure you have the highest quality garment possible. 

Below are just a few examples of the quality construction and attention to detail that is put into the design and manufacturing of Fire-Dex Turnout Gear.

Double Lock Stitching

Fire-Dex uses lock stitching on all major seams, cuffs, and reinforcements, with 4 rows of lock stitch on all reflective trim and hook & loop closure material.

Deep Water Wells

Deep sleeve water wells provide a natural glove/sleeve interface, keeping water out of the inside of sleeves.

Superior Pockets

All Bellows Pockets are reinforced with Kevlar® for the best cut resistance. All Radio Pockets are fully lined with moisture barrier, including the pocket flap. All pocket flaps are extra long to ensure complete closure, no matter the bulk inside.

Liner Tabs

Liner retention snap tabs come standard on all Fire-Dex coats to prevent "liner creep-up". Our standard liner tabs at the pant cuff are placed at the front and back to avoid wear between legs.

Detailed & Documented Moisture Barrier Seam Testing

We are partnered with both Moisture Barrier suppliers, W.L. Gore and Stedfast, and established a controlled environment for the most effective seam sealing. Every 10th garment is tested!

Hook & D Rivets

Always reinforced with a leather backing.

Moisture & Thermal Sewn Together

Prevents debris from entering between the layers and causing damaging abrasion to the moisture barrier. Inspection Ports can be added to any Fire-Dex Custom Turnout Coat or Pant.

Continuous Inspections Throughout Construction

Seventeen (17) inspection points throughout the process. Each team has an inspection station with electronic access to all specifications and work instructions.

Extra Thermal in High Compression Areas

Additional thermal protection is sewn to all high compression areas, such as knees, elbows, and shoulders, standard.

Express Gear Sizing Information

   Express Coat Sizing
SizeChestSleeve
SM38"32"
MD42"34"
LG46"35"
XL50"35"
2X54"36"
3X58"36"
 Express Pant Sizing
SizeWaistInseam*
SM32"29"
MD36"29"
LG40"29"
XL44"29"
2X48"29"
3X52"29"
*32" inseam available upon request

Check out the entire FireDex Master Catalog