Fire-Dex uses lock stitching on all major seams, cuffs, and reinforcements, with 4 rows of lock stitch on all reflective trim and hook & loop closure material.

Deep sleeve water wells provide a natural glove/sleeve interface, keeping water out of the inside of sleeves.

All Bellows Pockets are reinforced with Kevlar® for the best cut resistance. All Radio Pockets are fully lined with moisture barrier, including the pocket flap. All pocket flaps are extra long to ensure complete closure, no matter the bulk inside.

Liner retention snap tabs come standard on all Fire-Dex coats to prevent "liner creep-up". Our standard liner tabs at the pant cuff are placed at the front and back to avoid wear between legs.

We are partnered with both Moisture Barrier suppliers, W.L. Gore and Stedfast, and established a controlled environment for the most effective seam sealing. Every 10th garment is tested!

Always reinforced with a leather backing.

Prevents debris from entering between the layers and causing damaging abrasion to the moisture barrier. Inspection Ports can be added to any Fire-Dex Custom Turnout Coat or Pant.

Seventeen (17) inspection points throughout the process. Each team has an inspection station with electronic access to all specifications and work instructions.

Additional thermal protection is sewn to all high compression areas, such as knees, elbows, and shoulders, standard.